Draytek Vigor610 User Manual page 21

Connect To Network
Network Type
Channel
Encryption
Link Speed
Signal Strength
Link Quality
DHCP Status
Current IP
Subnet Mask
Default Gateway
DNS Server
Vigor610 Series User's Guide
It displays current status of connection. The SSID of the AP that
your computer connected will be shown here (with the MAC
address).
It displays the mode (Access Point or Peer to Peer) that you set for
connecting to AP.
It displays the channel used for this wireless card.
It displays the authentication mode used for this wireless card.
It displays current transferring rate for the link.
The longer the red bar for signal strength is, the better the
connection effect will be. The graph is active only when you
choose Access Point as the network type.
And the longer the red bar for link quality is, the better the
performance of transmission will be. The graph is active only
when you choose Access Point as the network type.
It displays current status of DHCP (enable or disable).
It displays current IP address set in profile setting for the wireless
card.
It displays the subnet mask set in profile setting for the wireless
card.
It displays the gateway address set in profile setting for the
wireless card.
It displays the DNS server set in profile setting for the wireless
card.
21