Teac LCD2681FHD User Manual page 34

Recording Operation
RECORDING IN STANDBY MODE
- This unit is able to do recording while in sleep mode.
- Start a recording, then press the power button.
- A pop up message as shown
Select "Turn off the screen, and continue recording".
-
Or select "Stop recording, and power off".
-
- While recording in standby mode, unit will not output any picture or sound. The power indicator will
flash in blue and red consecutively while there is a recording in standby mode.
Time Shift
Timeshift is an ideal ways to temporarily pause live TV in case of a distraction such as a doorbell or
a ringing telephone. Once the distraction has passed, playback can be resumed from the point
where the TV program was paused. Press the PLAY/PAUSE button on the remote control to start
the Time shift mode. Press the PAUSE button again to resume playback.
NOTE:
• You can display or minimize the Timeshift Menu by pressing EXIT button on the
remote control.
• Press STOP button to exit the Timeshift mode.
• Press PLAY button to play time shifted program.
3) Scheduled Recordings
Scheduled Recording is a function which allows the user to record future programs without physically
being present to initiate the recording. A schedule setup is made to mark recording dates and times of
the broadcasted programs stated on the Electronic Program Guide (EPG). Recording would terminate
at the end of the program.
To access the Electronic Program Guide (EPG), select the EPG button on the remote. This displays
the programs broadcasted by individual broadcasting channels. Select the program to be recorded by
browsing through the programs using the toggle buttons.
The current state of the program
A-B mark
above
will be displayed.
The process of the program
30
Recording Operation
The name and number
of the program
The current time