Changing The Parameters Shown In The Tone Screen - Roland GRAND Owner's Manual

5.
Turn the [Value] dial to select the write-destination tone
number.
6.
Press the [F4 (EXECUTE)] button to save the tone.
A confirmation screen will appear.
fig.ToneSave03.eps
If you decide to cancel without saving, press [F1 (CANCEL)].
7.
To save the tone, press [F4 (OK)].
The display will indicate "Executing..." while the data is being
saved. Never turn off the power during this time.
When the data has been saved, press the [Exit] button to return to
the previous screen.
Customizing the V-Piano Grand's Sounds
Changing the Parameters Shown in
the Tone Screen
1.
Press and hold down one of the [F1]–[F4] buttons.
A list of the tone parameters will appear.
2.
Continuing to hold down the function button, turn the
[Value] dial to select the desired parameter.
3.
Release the function button.
The parameter you selected is now assigned to that function button.
fig.EditParam03.eps
The state of the button assignments is saved in the tone (p. 42).
The function of opening the utility screen ([Utility]) can be
assigned only to the [F4] button.
The parameters assigned to the function buttons are indicated
using the following abbreviations.
Displayed (abbreviated form)
SOUNDLIFT
SOFTPEDAL
STR.RESO
DMP.RESO
SND.BOARD
KEYOFF
TUNING
STRETCH
HAMMER
RESONANCE
DECAY
TONECOLOR
DMP.TIME
DMP.NOISE
Parameter Name
Sound Lift
Soft Pedal Sense
String Resonance
Damper Resonance
Soundboard Resonance
Key Off Resonance
Unison Tune
Stretch Tune
Hammer Hardness
Cross Resonance
Decay Time
Tone Color
Damping Time
Damper Noise Level
43