File Management (7. File); Saving A Setup File (Save Setup File) - Roland GRAND Owner's Manual

Detailed Settings for Various Functions (Utility Screen)

File Management (7. File)

fig.UtilFile.eps
What is a setup file?
A "setup file" contains the V-Piano Grand's 100 user setups, 100 user
tones, and system settings, all in a single file.
This setup file can be saved to internal memory or to USB memory
(separately sold) connected to the USB Memory connector.
Up to six setup files can be saved in the V-Piano Grand's
internal memory.
About song files
SMF music files stored in USB memory can be copied to the V-Piano
Grand's internal memory.
A performance you've recorded on the V-Piano Grand can also be
saved as a song file to internal memory or to USB memory.
Audio data cannot be copied to internal memory.

Saving a Setup File (Save SETUP File)

Here's how to save a setup file to internal memory or to USB
memory (separately sold) connected to the USB Memory connector.
1.
In the File screen, turn the [Value] dial to select "Save
SETUP File," and then press the [Enter] button or the [F1
(ENTER)] button.
fig.UtilFile.eps
2.
Choose the media to which you want to save the setup
file.
In the Save SETUP File screen, press the [F1 (MEDIA)] button to select
the save-destination media.
Value Media
INT V-Piano Grand's internal memory
USB USB memory connected to the USB Memory connector
fig.UtilFileSave01.eps
64
3.
Press the [F2 (RENAME)] button to assign a name to the
setup file.
fig.UtilFileSave03.eps
Buttons
[Value] dial
[F1 (INSERT)] button
[F2 (DELETE)] button
[F3] button
[F4] button
When you've specified the name, press the [Enter] button or the
[Exit] button to return to the previous screen.
4.
When you've finished entering the file name, press the
[F4 (EXECUTE)] button to start saving the file.
fig.UtilFileSave04.eps
The screen will indicate "Executing..." while the file is being
saved. Never turn off the power while this screen is shown.
fig.UtilFileSave05.eps
If a file of the same name already exists, the confirmation
message "File Exists Overwrite OK?" appears. If you want to
overwrite the existing setup file, press the [F4 (OK)] button. If
you want to re-save the file with a different name, press the [F1
(CANCEL)] button.
5.
When the file has been saved, press the [Exit] button to
return to the previous screen.
Description
Changes the character.
Inserts a blank space.
Deletes the character at the cursor location.
Moves the cursor one character to the left.
Moves the cursor one character to the right.