Transmitting A Bank Select Msb Message - Roland Cakewalk A-500S Owner's Manual

Transmitting a bank select MSB message

Here's how to transmit a bank select MSB (#CC00) message on the "Current channel" (p. 31).
The bank select LSB and program change message you most recently transmitted (specified) as described in
"Transmitting a bank select LSB message" (p. 34) and "Transmitting a program change message" (p. 33) will also be
transmitted.
fig.BANK-1
4 1
fig.fig.utl
1.
Simultaneously hold the [MIDI CH] button and [PGM CHANGE] button
down.
The display will indicate "UTL," and the A-500S enters UTILITY mode.
2.
Press [BANK MSB] key.
fig.BANK-2
3.
Use the VALUE knob or the [0]–[9] keys of the keyboard to specify the bank select
MSB that you want to transmit.
* The -- area displays the currently set value. If it has not been set, the default setting will be
displayed. Even if you change the type or mode of the MIDI message that is assigned, the
default setting will be displayed. This will be lit if the value is the same as the currently set
value, or will blink if the value is different.
fig.fig.enter
4.
Press the [ENTER] button.
* The setting will be cancelled if you press another button instead of the [ENTER] button.
The bank select MSB message has now been transmitted.
3
Use MIDI Functionality
2
35