Transmitting A Reset Message - Roland Cakewalk A-500S Owner's Manual

ç

Transmitting a reset message

If notes on a connected MIDI sound module become "stuck," or if there is something wrong with the sound, you can
execute the Panic function to solve the problem.
When you execute the panic function, All sounds off, All notes off, and Reset all controllers messages will be
transmitted on all channels.
fig.panic-1
3
fig.utl
1.
Simultaneously hold the [MIDI CH] button and [PGM CHANGE] button
down.
The display will indicate "UTL," and the A-500S enters UTILITY mode.
fig.pnc
2.
Press the [PANIC] key.
The display will indicate "PNC" and blink.
fig.fig.enter
3.
Press the [ENTER] button.
* The setting will be cancelled if you press another button instead of the [ENTER] button.
The reset message has now been transmitted.
1
Use MIDI Functionality
2
45