Transmitting A Program Change Message - Roland Cakewalk A-500S Owner's Manual

Transmitting a program change message

This lets you transmit a program change message on the "Current channel" (p. 31).
fig.PC-1
2
fig.fig.Program
1.
Press the [PGM CHANGE] button.
The [PGM CHANGE] button will light. The display will indicate the program change that was
transmitted most recently.
2.
Use the VALUE knob to specify the program change you want to transmit.
Value range
The program change message has now been transmitted.
In CONTROLLER mode (p. 36), pressing the [PGM CHANGE] button will transmit a stop message (FCh).
1
0–127
Use MIDI Functionality
PLAY
33