Microwave Function; Keeping Food Warm - Hotpoint Manual

Use

microwave function

Programming by power level
Turn the selector button to choose the MICROWAVE
function.
The maximum power level, 1000W, appears in the display
and the cooking time numbers flash 01:00".
Set the cooking time with the + / - knob, for example:
10 minutes.
Press the VALIDATION button.
You can then reduce the power of the microwaves using
the + / - knob, for example 500W.
Confirm the selection by pressing START-STOP.
The oven switches on and the programme starts.
:
Note
If the door is opened during cooking, the oven stops and the remaining programme time is displayed.
To continue the programme, simply close the door again and press START-STOP.
The length of time may be adjusted at any time by simply turning the + / - button.

keeping food warm

keeping food warm
If you leave your dish in the oven at the end of a
microwave programme without opening the door, a
function called "heat and hold" starts after 2 minutes and
keeps your dish warm. Three beeps sound after
15 minutes to announce the end of the "heat and hold"
programme.
12
Display
Display