Use; Stopping The Turntable - Hotpoint Manual

Use

setting/changing the time
When you switch on your appliance or after an extended power cut, 00:00 flashes on the display.
To set the time, example: 06:30
Turn the + / - knob to set the desired time (06).
Confirm by pressing CLOCK.
Then set the minutes (30) with the + / - knob.
Press the START-STOP button.
A beep sounds to confirm that the time has been set.
To change the time
Press the CLOCK button. The time display flashes.
Set the new time, using the + / - knob.
Confirm by pressing the CLOCK button.
Then set the minutes with the + / - knob.
Confirm by pressing START-STOP.
A beep sounds to confirm that the new time has been set.
Comments: If you do not press the clock button, the time displayed is automatically saved after
10 seconds.

stopping the turntable

If you think that there is not enough space for it to rotate freely in the oven, select the turntable stop
function before or during the programme.
N.B.: the turntable cannot be stopped during an automatic defrost programme.
To activate this option:
Press the and
the turntable stops rotating.
To cancel:
Press the and
You must turn the cookware and stir its contents half way through the programme if the TURNTABLE
STOP FUNCTION is used.
10
buttons simultaneously and the
buttons.
symbol switches off in the display and
Display
Display