Roland V-1600HD Owner's Manual page 46

Changing the Output Source of the Second Connectors
Changing a Source
This changes the output source assigned to a connector.
1.
Display the OUTPUT menu.
Go to the SETUP section and press the [OUTPUT] button to display the OUTPUT menu.
fig.call-output-menu.eps
2.
Select the connector.
Use the up and down [CURSOR] buttons to choose the connector whose output source you want to change.
[SDI 1] and [DVI-D/HDMI 1] cannot be selected.
fig.AUX-change-menu.eps
3.
Change the source.
Turn the [VALUE] dial to change the source. Select [AUX], [PGM], or [PVW].
fig.set-AUX-source.eps
4.
Exit the menu.
Press the [EXIT] button to exit the menu.
46