Connecting A Computer (Dvi-D) - Roland V-1600HD Owner's Manual

Connecting a Computer (DVI-D)

Connect a computer providing DVI-D output to the DVI-D/HDMI IN connectors.
* When you're connecting a desktop computer, connect the display monitor to the THRU connector.
Use cables with ferrite cores when you connect computers to the V-1600HD.
fig.PC-connection-DVI.eps
By default, input to RGB/COMPONENT IN is assigned to channels 11 and 12, and input for DVI-D/HDMI is not assigned. Use the
menu operations described below to change the assignment. For more information about the menus, refer to "Menu Operations
and Menu List" (p. 47).
* The V-1600HD does not support HDCP.
1.
Display the INPUT menu.
Press the [INPUT] button to display the INPUT menu. The inputs assigned to the respective channels are displayed.
fig.press-input-button.eps
2.
Display the channel.
Press the left/right [CURSOR] buttons to change the page and display [Ch. 11] and [Ch. 12].
fig.ch11-12-display.eps
Connecting External Equipment
21