Table of Contents
Advertisement
Features
Terminating the SCSI/Host RAID configuration programme
Depending on the current menu level, you can display the previous menu by pressing the [ESC] key.
If you have made changes in the current menu you will be prompted to store them.
To quit the Configuration programme press the [ESC] key until a corresponding message is
Ê
displayed. Select Yes to quit.
Activating and Configuring Host RAID
To configure Host RAID select the menu entry Configure/View Host RAID Settings. If this entry is not
displayed you have to activate
Now the existing SCSI hard disks and already configured RAID drives are displayed.
Select one of the displayed hard disks and configure the RAID-System to your needs.
Detailed instruction on the configuration of Host RAID are contained in the Host RAID
i
User's Guide.
The administration of the RAID system can be set later by a tool in your operating system
(see therefor the documentation "Storage Manager Browser Edition"). this tool currently is
available for Windows NT4 and Windows 2000.
10 - English
Host RAID
with the entry Enable Host RAID Support.
A26361-D1409-Z120-1-7619
Advertisement
Table of Contents
