Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Fujitsu Siemens Computers D1409
Summary of Contents for Fujitsu Siemens Computers D1409
- Page 1 Technical Manual Mainboard D1409 English...
- Page 2 • Ihre Verkaufsstelle Weitere Informationen finden Sie im Handbuch "Sicherheit und Ergonomie". Aktuelle Informationen zu unseren Produkten, Tipps, Updates usw. finden Sie im Internet: http://www.fujitsu-siemens.com Are there ..any technical problems or other questions you need clarified? Please contact: •...
- Page 4 Este manual ha sido impreso sobre papel reciclado. Questo manuale è stato stampato su carta da riciclaggio. Denna handbok är tryckt på recyclingpapper. Dit handboek werd op recycling-papier gedrukt. A26361-D1409-Z120-1-7619 Bestell-Nr./Order No.: Printed in the Federal Republic of Germany AG 0306...
- Page 5 English Mainboard D1409 Technical Manual March 2006 edition...
- Page 6 Alle Rechte vorbehalten, insbesondere für den Fall der Patenterteilung oder GM-Eintragung. Liefermöglichkeiten und technische Änderungen vorbehalten. Copyright Fujitsu Siemens Computers GmbH 2003 Intel is a registered trademark of Intel Corporation, USA. PS/2 is a registered trademark of International Business Machines, Inc.
-
Page 7: Table Of Contents
Write protection for floppy disks - switch 4 ................. 16 Add-on modules ..........................17 Slot sequence..........................18 Installing the processor with heat sink and fan................19 Mounting heat sink ......................19 Upgrading main memory ......................20 Replacing lithium battery ......................22 Glossary ............................. 23 A26361-D1409-Z120-1-7619... -
Page 9: Introduction
Introduction This technical manual describes the mainboard D1409, which can be equipped with up to two Intel processors. You will find further information in the "BIOS Setup" description. Further information about drivers is provided in the readme files on the hard disk, on the supplied drivers diskettes, on the "Drivers &... -
Page 10: Information About Boards
• Remove the power plug from the mains supply before inserting or removing boards containing ESDs. • Always hold boards with ESDs by their edges. • Never touch pins or conductors on boards fitted with ESDs. 2 - English A26361-D1409-Z120-1-7619... -
Page 11: Features
(ECP- and EPP-compatible) • two external serial ports (COM1 and COM2) • two external and two internal USB1.1 ports • two external RJ45 LAN ports • two external PS/2 interfaces for keyboard and mouse • system monitoring English - 3 A26361-D1409-Z120-1-7619... -
Page 12: Interfaces And Connectors
Control panel 21 = Hot-plug panel (RX300) 10 = USB ports 2 / 3 22 = RSB (Remote Service Board) power supply 11 = IDE drives (primary) 23 = External ports 12 = IDE drives (secondary) 4 - English A26361-D1409-Z120-1-7619... -
Page 13: Temperature / System Monitoring
In addition, any unnecessary noise is also prevented by reducing the fan speed, and information is provided about the system status. Cover monitoring protects the system from unauthorised opening. The temperature and system monitoring are controlled by an onboard controller developed by Fujitsu Siemens. The following functions are supported:... -
Page 14: Lan Connector
"IRQ" = interrupt assigned as shipped "Address" = this address can be used for your particular device "Address" = this DMA can be used for your particular device Default settings are shown in bold print. 6 - English A26361-D1409-Z120-1-7619... -
Page 15: Pci Bus Resources
3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15 The selected ISA interrupt is assigned to the PCI interrupt. You may not select an ISA interrupt that is used by a component on the mainboard (e.g. controller) or an ISA board. English - 7 A26361-D1409-Z120-1-7619... -
Page 16: Screen Resolution
Screen resolution Refresh rate (Hz) Max. number of colours 640x480 16.7 mio. 800x600 16.7 mio. 1024x768 16.7 mio. 1152x864 16.7 mio. 1280x1024 16.7 mio. 1600x1200 16.7 mio. Shaded screen resolutions are not supported by LCD monitors (TFT). 8 - English A26361-D1409-Z120-1-7619... -
Page 17: Scsi/Host Raid Configuration Utility
Press <Ctrl> <A> for SCSI Select (TM) Utility! In the first menu the available U320 SCSI controller are displayed. The onboard SCSI controller of D1409 is displayed with the following entry: AIC-7902 at slot 00 00:04:00 When choosing the AIC-7902 you are taken to the top level of the configuration menu of this controller. -
Page 18: Terminating The Scsi/Host Raid Configuration Programme
The administration of the RAID system can be set later by a tool in your operating system (see therefor the documentation "Storage Manager Browser Edition"). this tool currently is available for Windows NT4 and Windows 2000. 10 - English A26361-D1409-Z120-1-7619... -
Page 19: Default Settings In The Menu Configure/View Scsi Controller Settings
BIOS Support for Bootable CD-ROM**** Enabled The setting is valid only if Multiple LUN Support is enabled (Enabled). Enabled **** The setting is valid only if the Int 13 Support of the SCSI controller is enabled ( English - 11 A26361-D1409-Z120-1-7619... -
Page 20: Scsi Bus Interface Definitions
If your boot device has multiple LUNs (Logical Unit Numbers) and Multiple LUN Support is Enabled, this option allows you to specify which LUN to boot from on your boot device. The default setting is LUN 0. 12 - English A26361-D1409-Z120-1-7619... -
Page 21: Scsi Device Configuration
BIOS Multiple LUN Support This option determines whether booting from a SCSI device that has multiple LUNs (Logical Unit Numbers) is supported. The default setting is No (disabled). English - 13 A26361-D1409-Z120-1-7619... -
Page 22: Advanced Configuration Options
The default setting is Verbose. While the system is booting, the SCSI controller's BIOS reports which devices are connected to the SCSI bus. Further settings are Silent (no messages are shown) and Diagnostic (additional information are shown for diagnostics purposes). 14 - English A26361-D1409-Z120-1-7619... -
Page 23: Scsi Disk Utilities
With Format Disk a selected hard disk is formatted in low-level format. Normally hard disks are already formatted in low-level format. You should use this menu item only if you want to erase the hard disk completely and regenerate the error list. English - 15 A26361-D1409-Z120-1-7619... -
Page 24: Settings With Switches
BIOS Setup must be disabled (in menu Security, the field Diskette Write must be set to Enabled). The floppy disk drive is write-protected. Floppy disks can be read, written and deleted (default setting). 16 - English A26361-D1409-Z120-1-7619... -
Page 25: Add-On Modules
10 = PCI slot 3: Zero Channel RAID 24 = LED L4 (amber): Global error indicator 11 = PCI slot 4: riser 25 = Error LEDs for memory banks 12 = PCI slot 5 13 = LED L3 (red): "Processor configuration error“ English - 17 A26361-D1409-Z120-1-7619... -
Page 26: Slot Sequence
A 5 V PCI card can only be mounted in PCI slot 5. • Slots 1 and 2 are "hot-plug" slots in which PCI boards can be replaced in the switched-on device. Please see your operating manual for the correct procedure. 18 - English A26361-D1409-Z120-1-7619... -
Page 27: Installing The Processor With Heat Sink And Fan
Heat conducting pads can only be used once. If you remove the heat sink, you must clean it and apply new heat conducting paste before you remount it. English - 19 A26361-D1409-Z120-1-7619... -
Page 28: Upgrading Main Memory
You may only use registered DDR DIMM memory modules. Unbuffered memory modules are not permitted. DDR DIMM memory modules must be designed for a clock frequency of 266 MHz (meets PC2100 specification). bank 2A/2B bank 1A/1B bank 0A/0B dummy 20 - English A26361-D1409-Z120-1-7619... - Page 29 Insert the memory module in the slot while folding the side holders up until the memory module engages (2). Removing a memory module Ê Push the clips on the right and left of the memory slot outward (1). Ê Pull the memory module out of the memory slot (2). English - 21 A26361-D1409-Z120-1-7619...
-
Page 30: Replacing Lithium Battery
Press the locking lug in the direction of the arrow (1); the battery jumps somewhat out of the holder (2). Ê Remove the battery (2). Ê Insert a new lithium battery of the same type into the socket (3). 22 - English A26361-D1409-Z120-1-7619... -
Page 31: Glossary
Super Video Graphic Adapter Managed Desktop PC Design I/O Controller Hub Universal Serial Bus Intelligent Drive Electronics Video Graphic Adapter IPMB Intelligent Platform Management Wake On LAN IPMI Intelligent Platform Management Zero Channel RAID Interface IPSEC Internet Protocol Security English - 23 A26361-D1409-Z120-1-7619... - Page 32 Information on this document On April 1, 2009, Fujitsu became the sole owner of Fujitsu Siemens Compu- ters. This new subsidiary of Fujitsu has been renamed Fujitsu Technology So- lutions. This document from the document archive refers to a product version which was released a considerable time ago or which is no longer marketed.