Table of Contents
Advertisement
3.2.3 Installation procedure
The installation procedure for internal hard disk units is as follows.
1
Touch a metal part of the chassis to discharge static electricity.
2
Remove the dummy unit.
Dummy units are installed in the bays where internal hard
disk units are not installed.
1. Press the tab on the bottom of the dummy unit
up.
2. Pull the dummy unit forward slowly and out.
Keep the removed dummy units in the safe place.
3
Install the internal hard disk unit.
1. Insert the unit fully into the disk bay with the
internal hard disk unit cover opened.
2. Close the cover securely.
PRIMERGY SX650 Storage Blade Hardware Guide
(2)
Tab
(2)
Cover
(1)
(1)
21
4
Advertisement
Table of Contents
