Fujitsu PRIMERGY SX650 Hardware Manual page 16

Chapter 2 Installation and Connection
3
Insert the SAS cable into the respective SAS connectors on this product and
the Server Blade (SAS RAID Ctrl) at the same time.
Insert it until it clicks (locked).
The SAS cable is universal.
■ Removing the SAS cable
Turning off the connected Server Blade before removing the SAS cable.
1
Hold the connector levers on both sides of SAS cable with both hands at the
same time.
The lock is released.
2
Pull out the SAS cable on both sides holding the connector levers at the same time.
16
SAS cable
Connector levers