Table of Contents
Advertisement
LAN
IP Address
Network Mask
MAC Address
Wireless
Name (SSID)
Region
Channel
Wireless AP
Broadcast Name
System
Device Name
Firmware Version
Buttons
ADSL Details
Attached Devices
Refresh Screen
The IP Address of the WBR-3600 Router.
The Network Mask (Subnet Mask) for the IP Address
above.
This shows the MAC Address for the WBR-3600 Router, as
seen on the LAN interface.
If using an ESS (Extended Service Set, with multiple access
points) this ID is called an ESSID (Extended Service Set
Identifier).
The current region, as set on the Wireless screen.
This shows the Channel currently used, as set on the Wire-
less screen.
This indicates whether or not the Wireless Access Point
feature is enabled.
This indicates whether or not the SSID is Broadcast. This
setting is on the Wireless screen.
The current name of the Router. This name is also the
"hostname" for users with an "@Home" type connection.
The version of the current firmware installed.
View the details of each VC (Virtual Circuit).
This will open a sub-window, showing all LAN and Wireless
devices currently on the network.
Update the data displayed on screen.
98
Advertisement
Table of Contents
