Table of Contents
Advertisement
Installation
2. Connect LAN Cables
Use standard LAN cables to connect PCs to the Switching Hub ports on the Wire-
less ADSL2+ Router. Both 10BaseT and 100BaseT connections can be used
simultaneously.
If required, connect any port to a normal port on another Hub, using a standard
LAN cable. Any LAN port on the Wireless ADSL2+ Router will automatically func-
tion as an "Uplink" port when required.
3. Connect ADSL Cable
Connect the supplied ADSL cable from to the ADSL port on the Wireless ADSL2+
Router (the RJ11 connector) to the ADSL terminator provided by your phone com-
pany.
4. Power Up
Connect the supplied power adapter to the Wireless ADSL2+ Router. Use only the
power adapter provided. Using a different one may cause hardware damage.
5. Check the LEDs
The PWR LED should be ON.
For the LAN (PC) connection, one of the LAN LEDs should be ON (provided the
PC is also ON.)
The WLAN LED should be ON
The DSL LED should be ON if ADSL line is connected.
The NET LED may be OFF. After configuration, it should come ON.
For more information, refer to Front-Panel LEDs in Chapter 1.
13
Advertisement
Table of Contents
