Diagnostics - LevelOne WBR-3600 User Manual

Diagnostics

This screen allows you to perform a "Ping" or a "DNS lookup". These activities can be
useful in solving network problems.
An example Network Diagnostics screen is shown below.
Data - Network Diagnostics Screen
Ping
Ping this
IP Address
Ping Button
DNS Lookup
Internet name
Lookup Button
Routing
Display
Figure 60: Network Diagnostics Screen
Enter the IP address you wish to ping. The IP address can be
on your LAN, or on the Internet. Note that if the address is on
the Internet, and no connection currently exists, you could get a
"Timeout" error. In that case, wait a few seconds and try again.
After entering the IP address, click this button to start the "Ping"
procedure. The results will be displayed in the Ping Results
pane.
Enter the Domain name or URL for which you want a DNS
(Domain Name Server) lookup. Note that if the address in on
the Internet, and no connection currently exists, you could get a
"Timeout" error. In that case, wait a few seconds and try again.
After entering the Domain name/URL, click this button to start
the "DNS Lookup" procedure.
Click this button to display the internal routing table. This infor-
mation can be used by Technical Support and other staff who
understand Routing Tables.
86