LevelOne WBR-3600 User Manual page 59

11g wireless adsl2+ router
Hide thumbs Also See for WBR-3600:
Table of Contents

Advertisement

Internet (VC1)
Connection Method
Connection Status
Internet IP Address
WAN MAC Address
Connection Details
LAN
IP Address
Network Mask
DHCP Server
MAC Address
Wireless
Name (SSID)
Region
Channel
Wireless AP
Broadcast Name
System
Device Name
Firmware Version
Displays the current connection method, as set in the Setup
Wizard.
This indicates the current status of the Internet Connection
Active - Connection exists
Idle - No current connection, but no error has been
detected. This condition normally arises when an idle
connection is automatically terminated.
Failed - The connection was terminated abnormally.
This could be caused by Modem failure, or the loss of
the connection to the ISP's server.
If there is an error, you can click the "Connection Details"
button to find out more information.
This IP Address is allocated by the ISP (Internet Service
Provider). If using a dynamic IP address, and no connection
currently exists, this information is unavailable.
It displays the MAC address for the WAN.
Click this button to open a sub-window and view a detailed
description of the current connection. Depending on the
type of connection, a "log" may also be available.
The IP Address of the WBR-3600 Router.
The Network Mask (Subnet Mask) for the IP Address
above.
This shows the status of the DHCP Server function. The
value will be "Enabled" or "Disabled".
This shows the MAC Address for the WBR-3600 Router, as
seen on the LAN interface.
If using an ESS (Extended Service Set, with multiple access
points) this ID is called an ESSID (Extended Service Set
Identifier).
The current region, as set on the Wireless screen.
This shows the Channel currently used, as set on the Wire-
less screen.
This indicates whether or not the Wireless Access Point
feature is enabled.
This indicates whether or not the SSID is Broadcast. This
setting is on the Wireless screen.
The current name of the Router. This name is also the
"hostname" for users with an "@Home" type connection.
The version of the current firmware installed.
59

Advertisement

Table of Contents
loading

Table of Contents