Setting Advanced Time Features - Vulcan-Hart ERD50 Installation & Operation Manual

Advanced Time Features
Each timer has additional timing functions that can be programmed to fit your particular operation.
• DUTY TIME - Notifies the operator during a fry cycle to perform a particular task (shake a
basket, flip a product, etc.). When the remaining cook time is the same as the Duty time, a beeper
sounds and DUTY # displays in the window. Press the flashing timer number to silence the
beeper. The beeper cancels after 5 seconds if not silenced.
• HOLD TIME - Starts after the initial timer beeper is silenced; HD# XX:XX is displayed in the
window. After timing out, a beeper sounds. Press the flashing timer number to silence the
beeper. The beeper cancels after 5 seconds if not silenced.
• COMPENSATED TIME - Automatically adjusts the time for variations in load sizes.
• STRAIGHT TIME - Does not adjust time for variations; used for regular timing operations.

Setting Advanced Time Features

1. Press and enter the program mode.
2. Press for timers
are lit on the timers available for programming, and SELECT PRODUCT is displayed in the
window.
3. Select a timer; the programmed time is displayed in the window.
A. Duty Time :
1) Press either arrow on
2) Enter the desired time using keys
3) Continue to the next step or press
B. Hold Time:
1) Press either arrow on
2) Enter the desired time using keys
3) Continue to the next step or press
C. Compensated or Straight Time:
1) Press either arrow on
2) Press
3) Press
completely.
through
; DT# 00:00 is displayed in the window.
; HD# 00:00 is displayed in the window.
; COMP or STRAIGHT is displayed in the window.
to select COMP or STRAIGHT.
to choose another timer or press
— 19 —
, or press for timers
through . The time is displayed in the window.
to choose another timer.
through .
to choose another timer.
through . The LEDs
to exit program mode