Vulcan-Hart ERD50 Installation & Operation Manual page 16

Programming Guide (Cont.)
PARAMETER
Press
Press
Language
Press
Press
Press
Press
Melt Options
Press
Press
Press
Press
Recovery
Time
Press
Press
Press
Filter
Press
Press
Press
Press
Dispose
Press
Press
Press
Set Back
Press
To
275°F
Press
*Recovery - During a cold start, the controller measures the time the fryer takes to heat from 200°F to 250°F (93°C to
121°C) and compares it with factory default values.
STEPS
to select a language.
when complete.
to select melt options.
(See Melt Options)
when complete.
when complete.
to scroll through options.
(See Filter)
when complete.
to scroll through options.
(See Dispose)
when complete.
Enter 11-99 min. of idle time
00=no set back
when complete.
— 16 —
LEFT DISPLAY
SELECT
ENGLISH (Factory Default) LANGUAGE
ENGLISH/ESPANOL
FRANCAIS/DEUTSCH
HOLLAND
PROGRAM
SELECT
NO MELT/LIQUID/SOLID
NO MELT/LIQUID/SOLID
PROGRAM
SELECT
RECOVERY*
PROGRAM
SELECT OPTIONS
FILTER
FILTER
PROGRAM
SELECT
DISPOSE
DISPOSE
PROGRAM
SELECT
IDLE SET BACK
PROGRAM
RIGHT DISPLAY
OPTIONS
OPTIONS
OPTIONS
OPTIONS
PROG 0000
PROG 0000
ACT 0000
TIME 00:00
OPTIONS
PROG 00
PROG 00
ACT00
OPTIONS
PROG 00
PROG 00