Vulcan-Hart ERD50 Installation & Operation Manual page 4

Model
ERD50
ERD85
ERC50
ERC85
Model
ERD50/ERC50
ERD85/ERC85
BATTERY CONFIGURATIONS
Batteries of up to four fryers wide can be configured with any ER Series Fryer or ERO Frymate Dump
Station (either 15 / " [39 cm] or 21" [53 cm ] wide). Possible configurations showing positions A through
1
2
E are depicted below:
NOTES:
= Dump Station;
*Indicates filter interplumbing not available.
A filter dump station can be located under any position in a battery if it has been built without an ERO Frymate.
A filter dump station can be located under any position in a battery if the line-up has been built with an ERO
Frymate located at either end of the battery.
When an ERO Frymate is built between two fryers within a battery, the filter dump station is located under the
ERO Frymate.
In two-unit batteries utilizing an ERO Frymate, the filter dump station will always be located under the fryer.
All options and accessories can be used with batteried equipment.
ERO15 is used on Model ER50.
ERO21 is used on Model ER85.
ER Series Fryer — Features
Fat Melt
Thermostat
Cycle
Solid State
Std.
Digital Display
Std.
Computer
ER Series Fryer — Construction Features
Filter Ready
Opt. (Use MF50)
Opt. (Use MF85)
= Fryer.
— 4 —
Basket Lift(s)
Opt.
Opt.
Battery
Configuration
Opt.
Opt.
Basket(s)
Twin Single Tri
Std. Opt. N/A
Std. Opt. Opt.
Std. Opt. N/A
Std. Opt. Opt.
Battery
Interplumbing
Opt.
Opt.