... 3 mPortant safety instructions Earthing Instructions ......5 Installation ......... 5 Commercial Microwave Oven Display and Features ......6 Using the Oven Control ..... 8 Keep these instructions for future Programming the Oven Control ..9 reference. If the oven changes ownership, User Options ........
Model Identification When contacting ACP, provide product information. Any questions or to locate an authorized ACP Product information is located on oven serial plate. servicer, call toll free 1-866-426-2621 inside U.S.A. or Record the following information: Canada, or 1-319-368-8120 outside U.S.A or Canada.
IMPORTANT SAFETY INSTRUCTIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. WARNING When using electrical equipment, basic safety precautions should be followed to reduce the risk of burns, electrical shock, fire, or injury to persons.
Visible bubbling or boiling when the container materials are placed inside the oven to facilitate is removed from the microwave oven is not always cooking. present. THIS COULD RESULT IN VERY HOT LIQUIDS SUDDENLY BOILING OVER WHEN A b.
Do not install oven next to or above source of heat, such as pizza servicer if earthing instructions are oven or deep fat fryer. This could cause microwave oven to operate not completely understood, or if improperly and could shorten life of electrical parts.
Display and Features Indicates oven is in a manual cooking program Cooking information shows in display after pressing Time Entry while in Ready Mode. Ready indicates the oven is ready Time left Percentage to operate. in cooking of microwave program power Cooking Display DISPLAYS...
Display and Features Time Entry Stage Program Save Quantity Power Level Single Pad Programming This feature enables each numbered pad to be START Pad programmed for a specific use, such as cooking a The start pad is used certain number of potatoes or defrosting and then to begin a manual cooking vegetables or other frozen foods.
Using the Oven Control Manual Time Entry Microwave Cooking To cook food using a specific entered time and power level. Microwave cooking uses high frequency energy waves to heat the 1. Open oven door and place food in oven. Close door. food.
Each 8. To discard changes, press STOP/RESET. time the quantity pad is pressed, the cooking time will be increased by the user-specified percentage. ACP’s Programming Multiple Stages default cooking factor is 80%. Stage cooking allows consecutive cooking cycles without interruption.
User Options HIDDEN HIDDEN Amana Menumaster Changing user options Options such as single or double pad programming and beep volume can be changed to suit individual preferences. If oven has just been energizied door must be opened and closed before proceeding: 1.
Wring sponge or cloth to remove excess water before wiping To avoid risk of product damage, equipment. If desired, boil a cup of water in microwave oven to loosen soil clean air filter regularly. before cleaning. DO NOT allow cooking residues such as grease or fat to remain in oven interior for any length of time.
Cleaning Splatter Shield To avoid risk of personal injury, wear gloves to protect hands Splatter shield keeps top of microwave oven cavity and antenna from from accidental bulb breakage. becoming soiled. Clean soil from shield with damp cloth or clean with mild detergent and water.
Place one cup of water in oven. Run for one (1) minute at full power (100%) If temperature does not rise, oven is not operating correctly. Contact ComServ or an authorized ACP servicer. HOT displays Oven’s magnetron is overheated. Oven automatically interrupts cooking sequence and turns on cooling fan until normal temper- ature is reached.
Need help?
Do you have a question about the Microwave Oven and is the answer not in the manual?
Questions and answers