Password Protection - iConyx IC2-R User Manual

2
IC
Users Manual

Password Protection

RHAON software includes three levels of password protection. This features is designed to prevent inadvertent changes of Connect and
Control Mode settings by anyone who is unauthorized or unfamiliar with the system.
To open the Password Protection setup window shown below, hit Control-Alt-p.
You can set up three levels of control access. They are called Designer, Operator and Supervisor. Each access level should have its own
password.
The Designer has the highest level of access. This person should set up the access control system and passwords before turning a
RHAON system over to its owners and operators.
The Operator has the next highest level of access. We suggest giving an Operator access to all Control Mode functions that would nor-
mally be used while running a show or operating the system. In a fixed installation, Operator level personnel would probably not be granted
access to the Compressor, EQ, Delay, Shelving and roll off controls, but they would be able to adjust Input Gain if necessary to respond to
clipping and/or over temperature alerts.
The Supervisor access level is intended for those who are only monitoring (supervising) the system for faults and failures. Supervisors
would normally be given access to few, if any, of the functions in Control Mode.
RHAON passwords are case sensitive. Once the password access system has been set up it will be impossible to operate RHAON without
entering a password. The Password Prompt shown below will appear each time the program is opened and a proper password must be
entered before proceeding.
57
46