iConyx IC2-R User Manual page 26

2
IC
Users Manual
The opening Beam Steering window displays the setup criteria and the beams aiming angle and focal point.
It does not map (calculate and display) the Array's beam until the Calculate Mapping button is pressed. You'll find it in the Mapping setup
section. on the right side of the screen. The Mapping section controls the calcula-
tion's frequency, bandwidth and weighting.
Note the four control buttons in the lower right corner of the Beam Steering window.
Pressing Send to Working Memory will send any beam steering configuration setting
changes you have made directly to the array's DSP and write over any previous
settings.
Pressing Save to Preset will store the configuration settings as a configuration Pre-
set in the selected preset file. We'll go into Presets in more detail later.
Note that in both cases, only the beam steering information is being sent to the Ar-
ray's DSP.
Export Setup will generate a .rhs setup file that can easily be imported into an EASE
and EASE JR model for a detailed acoustic evaluation. Beam Steering shows you
the array's vertical coverage, but not the horizontal coverage or the effect of reflec-
tions on intelligibility and clarity. EASE and EASE JR do.
Import Setup allows you to import into Beam Steering any changes you may have
made in the configuration settings in EASE or EASE JR.
26