Saving Changes; Saving To Presets - iConyx IC2-R User Manual

2
IC
Users Manual
Priority Override is one of the unique features of RHAON. It allows you to assign
signal-activated priority override capabilities to any one of the array's multiple
inputs. The Priority Override controls in the lower right section of the properties
window allow you to set the Attach Time, the Hold Time, the Release Time and
the Threshold Level.

Saving Changes

Although any changes you made in either the Connect or Control windows have been sent to the associated array, they have not been
saved to the Array's non-volatile DSP memory. Clicking on the Save button at the bottom left of each Properties window will save them. If
you forget to save them, a warning prompt will remind you that the changes have not been saved when you exit the window. You will also
be prompted to Save Your Project before you exit the RHAON software.

Saving to Presets

At this point none of the configuration settings have been stored in a Preset. The Save Preset and Load Preset command fields and their
associated up/down arrows are used to save your configuration as a Preset and to select (load) a specific Preset configuration into the
array's DSP memory. The Preset will include all the DSP settings you made in the Control mode (EQ, gain, compression, etc.).
38