Lenovo 3057 Maintenance Manual page 141

Notes:
• If you remove the TMM Premium, the iKVM function for server remote management will be unavailable.
• Use any documentation that comes with the TMM Premium and follow those instructions in addition to
the instructions in this topic.
• Depending on the model, your server might look slightly different from the illustration in this topic.
To remove the TMM Premium, do the following:
1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all
power cords from electrical outlets and disconnect all cables that are connected to the server.
2. If the server is installed in a rack cabinet, remove the server from the rack cabinet and place it on a flat,
clean, and static-protective surface. See the Rack Installation Instructions that comes with the server.
3. Remove the server cover. See "Removing the server cover" on page 85.
4. Locate the TMM Premium connector on the system board and then lift the TMM Premium straight
up to remove it from the connector.
Figure 82. Removing the TMM Premium
5. If you are instructed to return the old TMM Premium, follow all packaging instructions and use any
packaging materials that are supplied to you for shipping.
.
Chapter 6 Installing, removing, or replacing hardware
127