Optional I/O Modules - Fujitsu PRIMERGY BX620 S6 Options Manual

7

Optional I/O modules

You can install an additional I/O module in the PRIMERGY BX620 S6
server blade. For this purpose, the server blade has a special slot for an
extension board (daughter card) (see
The following I/O daughter cards are available for the BX620 S6 server blade:
– 4-Gbit Fibre Channel daughter card (PCIe)
– 1-Gbit Ethernet daughter card (PCIe)
I
To be able to use the additional I/O functionality, at least one FC I/O blade
or an Ethernet I/O blade must be installed in slots NET3 and/or NET4 of
the BX600 S3 basic unit. For further information on I/O blades, see the
operating manual for your basic unit.
It is not possible to install a combination of Fibre Channel I/O blades and
Ethernet I/O blades in slots NET3 and NET4 of the basic unit.
BX620 S6
figure 19 on page
Options Guide
40).
37