Fujitsu PRIMERGY BX620 S6 Options Manual page 32

Installing a second processor
Figure 12: Fastening the processor heat sink
Ê Carefully place the heat sink onto the CPU.
Ê Fix the heat sink by fastening the four premounted screws in diagonally
opposite sequence.
V
CAUTION!
Never install a processor without a heat sink! The processor is likely
to overheat, which may cause damage to the processor and the
system board.
Ê Close the server blade, place it in the system unit and switch on the
server blade as described in the
32
chapter "Completion" on page
Options Guide
53.
BX620 S6