Fujitsu PRIMERGY BX620 S6 Options Manual page 49

Installing the BBU card
Before installing the BBU card on the riser card, please check the following:
Figure 28: Connector for the BBU cable
Figure 29: Installing the BBU card
Ê Push the BBU card into the slot on the riser card (1) as far as it will go.
Ê Let the two ejection tabs on the right and left engage in the notches of the
BBU card (2).
How to install the storage module in the server blade is described in the
following section.
BX620 S6
I
Options Guide
Storage module variants
Make sure the BBU cable is
plugged in (see circle).
49