Safety Instructions - Fujitsu PRIMERGY BX620 S6 Options Manual

3

Safety instructions

I
The following safety instructions are also provided in the manual "Safety
Notes and Regulations".
This device complies with the relevant safety regulations for data processing
equipment, including electronic office machines for use in an office
environment.
If you have any questions as to whether you can set up the device in your
particular environment, please contact your sales outlet or our customer service
centre.
V
CAUTION!
The actions described in this manual shall be performed by technical
specialists. A technical specialist is a person who is trained to install
the server blade including hardware and software.
Repairs to the device that do not relate to CSS failures shall be
performed by service personnel. Please note that unauthorized
interference with the system will void the warranty and exempt the
manufacturer from all liability.
Any failure to observe the guidelines in this manual, and any improper
repairs could expose the user to risks (electric shock, energy
hazards, fire hazards) or damage the equipment.
Before installing/removing internal options to/from the server blade,
turn off the server blade, all peripheral devices, and any other
connected devices. Also unplug all power cords from the power
outlet. Failure to do so can cause electric shock.
Before starting up
V
CAUTION!
During installation and before operating the device, observe the
instructions on environmental conditions for your device.
If the device is brought in from a cold environment, condensation may
form both inside and on the outside of the device.
Wait until the device has acclimatized to room temperature and is
absolutely dry before starting it up. Material damage may be caused
to the device if this requirement is not observed.
BX620 S6
Options Guide 19