Advertisement
9.
Attach the harness clip to the back of the radio with
one 5 x 8 mm washer-screw.
10. Fold the bus cable in half, and secure it with the
harness clip.
11. Position the radio on the CD player, then assemble
the CD player and radio with the brackets and four
screws removed in step 8, and the four 5 x 8 mm
washer-screws provided. Plug the bus cable
connector into the back of the radio.
SCREWS
(reused)
RADIO
5 x 8 mm
WASHER-
SCREWS
CD PLAYER
UP
1998 American Honda Motor Co., Inc - All Rights Reserved.
5 x 8 mm
SCREW
HARNESS
CLIP
BUS
CABLE
HARNESS
CLIP
BUS CABLE
Plug in the
connector.
SCREWS
(reused)
5 x 8 mm
WASHER-
SCREWS
R
BOLT
POSITIONS
5 x 8 mm
WASHER-
SCREWS
POSITIONS
12. Install the radio/CD player with the four radio
mounting bolts removed in step 7.
RADIO MOUNTING
BOLTS (reused)
13. Reinstall all removed parts.
14. Check that all wire harnesses are routed properly
and all connectors are plugged in.
15. Reconnect the negative cable to the battery.
16. Reset the radio station presets and the clock.
17. Check that the radio and the CD player operate
properly as described in the respective owner's
manuals.
All 20000 (9809)
3 of 3
Advertisement
