Table of Contents
Advertisement
Read the instructions and keep them safe. If you pass the blender on, pass on the
instructions too. Remove all packaging, but keep it till you know the blender works.
important safeguards
Follow basic safety precautions, including:
1 This blender must only be used by a responsible adult. Use and store the blender
out of reach of children.
2 Don't put the motor unit in liquid, don't use it in a bathroom, near water, or
outdoors.
3 Unplug before dismantling or cleaning.
4 The blender is fitted with a safety switch to prevent the motor operating unless the
jug is in place. Don't use this to switch the blender on and off.
5 Switch off (Y) before fitting the jug to the motor unit.
6 Switch off (Y) and wait till the blades come to a complete stop before removing the
lid from the jug, and before removing the jug from the motor unit.
7 Don't use the blender unless the lid is in place.
8 Don't fill with anything hotter than you can comfortably handle (i.e. liquid
temperature below 40°C).
9 When blending hot liquids, put a hand on the lid to hold it in place.
10 Don't put your hand into the jug, even when it's been removed for
cleaning – the blades are sharp.
11 Take great care when handling the blade unit.
12 Don't put any other object (spoon, spatula, etc.) into the jug while the blender is
plugged in.
13 Don't leave the blender unattended while plugged in.
14 Sit the motor unit on a dry, firm, level surface, close to a power socket and out of
reach of children.
15 Route the cable so it doesn't overhang, and can't be tripped over or caught.
16 Keep the blender and the cable away from hotplates, hobs or burners.
17 Don't let the jug overflow. If liquid gets under the motor unit, it may be sucked into
the motor, damaging it.
18 Don't fill the jug above the 1250ml mark – if you do, the contents may force the lid
off when you start the motor.
19 Don't run the motor for more than 3 minutes, or it may overheat. After 3 minutes,
switch off for at least 3 minutes, to let the motor cool.
20 Don't use the blender for any purpose other than those described in these
instructions.
21 Don't run the blender empty, it may overheat.
22 Don't use the blender if it's damaged or malfunctions.
23 If the cable is damaged, return the blender, in order to avoid hazard.
before using for the first time
Turn to "care and maintenance" on page 5 and clean the blender, to remove any
manufacturing residues, dust, etc.
household use only
3
Advertisement
Table of Contents
