Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Russell Hobbs 14369
Summary of Contents for Russell Hobbs 14369
- Page 1 instructions...
-
Page 3: Important Safeguards
Read the instructions and keep them safe. Pass them on if you pass the iron on. Remove all packaging, but keep it till you know the iron works. important safeguards Follow basic safety precautions, including: 1 This iron must only be used by or under the supervision of a responsible adult. Use and store the iron out of reach of children. - Page 4 • Put the iron on the base unit and put the plug into the power socket (switch the socket on, if it’s switchable). The base unit will beep, the buttons will flash once. • Press the 2 button to switch the iron on. •...
-
Page 5: Temperature Setting Guide
switch on 9 Sit the iron on rests on top of the base unit. 10 Put the plug into the power socket (switch the socket on, if it’s switchable). 11 The base unit will beep, the buttons will flash once. 12 Press the 2 button to switch the iron on. -
Page 6: Dry Ironing
20 Squeeze the trigger to produce steam, release it to stop the steam. , Don’t let the water level drop below min while the iron is in use, or you’ll have to prime the pump again when you refill the reservoir. - Page 7 holidays 44 If you’re going to leave the iron for more than a week, it’s best to empty the reservoir, to avoid mould. 45 The iron must be unplugged and cold. 46 Remove the main reservoir and empty it via the filler. 47 Wipe off any excess moisture, then replace it in the base unit.
- Page 8 connection The product must be earthed. It has a 13A BS1362 fuse in a 13A BS1363 plug. To replace the plug, fit the green/yellow wire to E or E, the blue wire to N, and the brown wire to L. Fit the cord grip. If in doubt, call an electrician.