Advertisement
preparation
• Route the cable so it can't be caught or tripped over.
• Lift the handle till it clicks into place.
• Sort fabrics by textile care symbols.
j cool – nylon, acrylics, polyester
k warm – wool, polyester mixtures
l hot – cotton, linen
i do not iron
• If the garment label directions differ from these, follow the label.
• Lift the filler cap, fill the handle from the jug, and replace the cap.
• Use the jug to fill the tank via the steam control. Don't fill past
max, or water will escape.
ironing
• Turn the thermostat to the required setting.
• Slide the steam control towards R for more steam, away for less.
• Sit the iron upright on a stable, level heat-resistant surface, and
plug it in – the light will glow.
• When the light goes out, start ironing – use an ironing board, or a
folded sheet or towel on a flat, heat-resistant surface.
• Iron fabrics needing low heat first, then work up to those needing
most heat.
steam iron set the thermostat to •••, or water may drip on the
fabric.
dry iron
if the fabric mustn't be wetted, empty the water tank
before ironing.
•
• •
• • •
2
Advertisement
