Cisco 3200 Series Hardware Reference Manual page 123

Appendix B SFP Module Replacement
Error Message NOT_IDENTIFIED: Detected for transceiver module in %s, module disabled
Explanation
identified and may not be compatible with the interface. The transceiver module specified in the
error message contains a transceiver code which could not be correctly interpreted. As a result of
the error, the module is disabled.
Recommended Action
Error Message UNSUPPORTED-TRANCEIVER: Unsupported SFP transceiver found on board.
Warranty/support may void
Explanation
supported module. As a result of the error, the module is disabled. When Cisco determines that a
fault or defect can be traced to the use of third-party transceivers installed by a customer or reseller,
then, at Cisco's discretion, Cisco may withhold support under warranty or a Cisco support program.
In the course of providing support for a Cisco networking product Cisco might require that the end
user install Cisco transceivers if Cisco determines that removing third-party parts will assist Cisco
in diagnosing the cause of a support issue.
Recommended Action
OL-5816-10
The transceiver module for the interface specified in the error message could not be
Replace the module with a compatible transceiver.
The transceiver module for the interface specified in the error message is not a Cisco
None.
Cisco 3200 Series Router Hardware Reference
B-5