Cisco 3200 Series Hardware Reference Manual page 66

Table 6-2
Feature
Security
Status Indicators
Memory
Automatic Configuration
Support
Remote Configuration
Support
Uplink
Local Configuration
Cisco 3200 Series Router Hardware Reference
6-6
Key Features (continued)
Description
Cisco Wireless Security Suite:
Authentication:
802.1X support including Extensible Authentication Protocol
•
(EAP)-Transport Layer Security (TLS), Lightweight EAP (LEAP),
Protected EAP (PEAP), and EAP-Subscriber Identity Module (SIM) to
yield mutual authentication and dynamic, per-user, per-session WEP
keys.
MAC address and by standard 802.11 authentication mechanisms.
•
Encryption:
Static and dynamic IEEE 802.11 WEP keys of 40 bits and 128 bits.
•
802.11i/WPAv2 Advanced Encryption Standard-Counter Mode with
•
Cipher Block Chaining Message Authentication Code Protocol
(AES-CCMP); 128-bit key length.
Temporal Key Integrity Protocol (TKIP) WEP enhancements: key
•
hashing (per-packet keying), message integrity check (MIC), and
broadcast key rotation by using WPA TKIP.
All WMICs in Root Mode:
PEAP, EAP-TTLS, LEAP, EAP-TLS, EAP-FAST, and EAP-SIM.
Cisco 3201 WMICs in Client Mode:
LEAP, EAP-TLS, and EAP-FAST.
Cisco 3202 and Cisco 3205 WMICs in Client Mode:
LEAP.
LEDs provide information about association status, operation,
error/warning, firmware upgrade, and configuration, network/modem, and
radio status.
8 MB Flash.
32 MB DRAM.
BOOTP and DHCP.
Telnet, HTTP, FTP, TFTP, and SNMP.
Autosensing 10/100BaseT Ethernet.
Console port.
Chapter 6 Wireless Mobile Interface Cards
OL-5816-10