Cisco 3200 Rugged Enclosure Led Indications; Cisco 3270 Rugged Enclosure I/O End Cap Led Indications - Cisco 3200 Series Hardware Reference Manual

Cisco 3200 Rugged Enclosure LED Indications

This section describes the LED indications for the Cisco 3200 Rugged Enclosure I/O end caps.
The behavior of the WMIC LEDs is described in the
Note

Cisco 3270 Rugged Enclosure I/O End Cap LED Indications

Table 1-2
Table 1-2
LED
Cisco 3270 Rugged Router card
Serial Status/Link (1 status/link
LED per serial port)
Fast Ethernet
(1 LED per port, except for the
fiber-optic port, which has no
LEDs)
Gigabit Ethernet
(2 LEDs per port)
Console
WMIC Console (Installation or
Operation Mode)
Cisco 3200 Series Router Hardware Reference
1-18
lists the LEDs for the Cisco 3270 Rugged Enclosure I/O end caps and their indications.
LEDs for the Cisco 3270 Rugged Enclosure End Cap
"WMIC Console LEDs" section on page
Indication
Solid green: OK.
Blinking: Booting and self-testing.
Black: Not OK or the power is off.
Solid green: Link OK.
Black: No link is detected.
Amber blink: Activity.
Link LED
Solid green: Link OK.
Black: No link is detected.
Activity LED
Black: No activity and no connection.
Green blink: Activity.
Link LED
Solid green: Link OK.
Black: no link is detected.
Activity LED
Solid green: Link OK.
Black: No activity.
Green blink: Activity.
Solid green: Link OK.
Black: No activity.
Green blink: Activity.
For installation mode, see
For operation mode, see Table 1-5 on page
Chapter 1 Cisco 3200 Rugged Enclosures
Table 1-4 on page 1-19.
1-20.
1-19.
OL-5816-10