Cisco 3230 Rugged Enclosure I/O End Cap Led Indications; Wmic Console Leds - Cisco 3200 Series Hardware Reference Manual

Chapter 1 Cisco 3200 Rugged Enclosures

Cisco 3230 Rugged Enclosure I/O End Cap LED Indications

Table 1-3
Table 1-3
LED
MARC
Serial Status/Link (1 status/link LED per
serial port)
Fast Ethernet (2 LEDs per Fast Ethernet
port)
WMIC Console (Installation or Operation
Mode)

WMIC Console LEDs

WMIC console LEDs function in installation mode or operational mode. The WMIC is set to the
installation mode by default. To change the function of the WMIC, use the station role command.
Table 1-4
Table 1-4
RSSI (dBm)
> –51
–58 to –54
–60 to –57
–63 to –60
–66 to –63
–69 to –66
–72 to –69
–75 to –72
< –75
OL-5816-10
lists the LEDs for the Cisco 3230 Rugged Enclosure I/O end caps and their indications.
LEDs for Cisco 3230 Router I/O End Caps
shows the status of the LEDs when the WMIC is in installation mode (signal strength).
WMIC Installation Mode
Status LED
Steady
Fast blinking (16 Hz)
Slow blinking (4 Hz
Very slow blinking (2 Hz)
Black
Black
Black
Black
Black
Indication
Solid green: OK.
Blinking: Booting and self-testing.
Black: Not OK or the power is off.
Solid green: Link OK.
Black: No link is detected.
Amber blink: Activity.
Link LED
Solid green: Link OK.
Black: No link is detected.
Activity LED
Black: No activity.
Green blink: Activity.
For installation mode, see
For operation mode, see Table 1-5 on page
Radio LED
Steady
Steady
Steady
Steady
Steady
Fast blinking (16 Hz)
Slow blinking (4 Hz
Very slow blinking (2 Hz)
Black
Cisco 3200 Series Router Hardware Reference
Table 1-4 on page 1-19.
1-20.
1-19