Advertisement
Océ Quick Start
3) Load paper
⇒ Tray 1, 2, 3
1.
Withdraw tray 1, 2, or 3 completely, and lift the paper feed roller.
2.
Adjust the position of the side guide plate
•
Pull up the lock lever at the front, then slide the side guide plate to the desired position.
•
See the size indication on the bottom plate of the tray to determine the position of the side guide plate.
•
Push down the lock lever firmly until it clicks in position to fix the side guide plate.
3.
Adjust the position of the rear stopper.
•
To slide the rear stopper to the right, hold it at the upper part and slide it while pressing down slightly.
•
On the other hand, hold the rear stopper at the lower part to slide it to the left.
Page 5 of 24
Advertisement
