Advertisement
QuickSpecs
Configuration
General Site Preparation
General Site Preparation
General Site Preparation
General Site Preparation
Rules
Rules
Rules
Rules
AC Power Requirements
AC Power Requirements
AC Power Requirements
AC Power Requirements
The modular, N+1 power shelf assembly is called the Front End Power Subsystem (FEPS). The
redundancy of the FEPS is achieved with 6 internal Bulk Power Supplies (BPS), any five of which can
support the load and performance requirements.
Input Options
Input Options
Input Options
Input Options
Reference the Site Preparation Guide for detailed power configuration options.
Input Power Options
Input Power Options
Input Power Options
Input Power Options
PDCA
PDCA
PDCA
PDCA
Source
Source
Source
Source
Source Voltage
Source Voltage
Source Voltage
Source Voltage
Product
Product
Product
Product
Type
Type
Type
Type
(nominal)
(nominal)
(nominal)
(nominal)
Number
Number
Number
Number
A5800A
3-
Voltage range
Option 006
phase
200-240 VAC,
phase-to-phase,
50/60 Hz
A5800A
3-
Voltage range
Option 007
phase
200-240 VAC,
phase-to-neutral,
50/60 Hz
a. A dedicated branch is required for each PDCA installed.
b. In the U.S.A, site power is 60 Amps; in Europe site power is 63 Amps.
c. Refer to the Option 006 and 007 Specifics Table
Option 006 and 007 Specifics Table
Option 006 and 007 Specifics Table
Option 006 and 007 Specifics Table for detailed specifics related to this option.
d. In the U.S.A. site power is 30 Amps; in Europe site power is 32 Amps.
Option 006 and 007 Specifics
Option 006 and 007 Specifics
Option 006 and 007 Specifics
Option 006 and 007 Specifics
DA - 11717
Worldwide — Version 35 — December 6, 2006
HP Integrity Superdome Servers 16- processor, 32-
HP Integrity Superdome Servers 16- processor, 32-
HP Integrity Superdome Servers 16- processor, 32-
HP Integrity Superdome Servers 16- processor, 32-
processor, and 64- processor Systems
processor, and 64- processor Systems
processor, and 64- processor Systems
processor, and 64- processor Systems
PDCA
PDCA
PDCA
PDCA
Input Current
Input Current
Input Current
Input Current
Required
Required
Required
Required
Per Phase
Per Phase
Per Phase
Per Phase
200-240 VAC
200-240 VAC
200-240 VAC
200-240 VAC
4-wire
44 A
Maximum per
phase
5-wire
24 A
Maximum per
phase
* * * *
Power Required
Power Required
Power Required
Power Required
2.5 meter UL power cord and OL
approved plug provided. The
customer must provide the mating in
line connector or purchase quantity
one A6440A opt 401 to receive a
mating in line connector. An
electrician must hardwire the in-line
connector to 60 A/63 A site
a,b,c
power.
2.5 meter <HAR> power cord and
VDE approved plug provided. The
customer must provide the mating in
line connector or purchase quantity
1 A6440A opt 501 to receive a
mating in-line connector. An
electrician must hardwire the in-line
connector to 30 A/32 A site
a,b,d
power.
Page 43
Advertisement
