Power Connection; Access To Machine - Ricoh DX 4542 Operating Instructions Manual

Mfps & printers
Table of Contents

Advertisement

Power Connection

R WARNING:
• Connect the power cord directly into a wall outlet and never use an ex-
tension cord.
• Only connect the machine to the power source describe in the manual.
• Do not damage, break or make any modifications to the power cord.
Do not place heavy objects on it. Do not pull it hard nor bend it more
than necessary. These actions could cause an electric shock or fire.
R CAUTION:
• Unplug the power cord from the wall outlet before you move the machine.
While moving the machine, you should take care that the power cord will not
be damaged under the machine.
R CAUTION:
• When you disconnect the power plug from the wall outlet, always pull the
plug (not the cable).
• The socket-outlet shall be installed near the machine and shall be easily acces-
sible.
• Voltage must not fluctuate more than 10%.

Access to Machine

Place the machine near the power source, providing clearance as shown.
❖ Main Frame
4
1.
More than 10 cm, 4.0"
2.
More than 60 cm, 23.7"
3.
More than 60 cm, 23.7"
4.
More than 60 cm, 23.7"
1
2
3
GRINST0E
Where to Put the Machine
6
127

Advertisement

Table of Contents
loading

Table of Contents