Configuration Guide <internal HDD>(3.5inch HDD cage)
Choices of RAID configuration
Select RAID configuration from below. (Mixed configuration is not supported.)
Non-RAID
RAID
RAID0/1/10
Notes
The integrated SATA controller is used in case A and B.
Case C/D/E use the RAID controller of the PCI EXPRESS CARD. (It will occupy one PCI slot.)
For details on the HDD configuration, refer to the to the end of this document.
Case A. non RAID (connect to on-board SATA connector)
Integrated SATA controller
Standard
3Gb/s SATA
2003
2003R2
2008
2008x64
R2x64
EL4
EL4x64
EL5
EL5x64
Case B.
on-board RAID (connect to on-board SATA connector)
Integrated SATA controller
Standard
RAID 0/1/10
3Gb/s SATA
2003
2003R2
2008
R2x64
Windows OS
Not Windows OS
RAID5/6
Promise's card
LSI's card
3.5-inch HDD cage
[standard]
(Case A/B/C/D/E)
SATA cable
x4 Standard
(SATA – SATA cable)
2008 R2
S L 1 0
S L 1 0 ÿ X 6 4
SATA cable
x4 Standard
(SATA – SATA cable)
2008x64
2008 R2
Express5800/GT110b
On-board RAID
RAID Cache: 128MB
Slot 3
Slot 2
Slot 1
Slot 0
3.5-inchHDD
cageStandard
Up to four (non hot-swap)
3.5-inchHDD cage
Standard
Up to four (non hot-swap)
Device
Case A
Case B
Case C
SATA HDD
Case D
Case E
SATA HDD
SATA HDD
8