NEC Express5800/GT110b User Manual page 16

Configuration Guide <internal backup device>
Up to one device (USB/SCSI/SAS) can be installed.
SAS device (connect to 5inch device bay and PCI slot)
SAS controller
 SAS controller

RHEL version should be RHEL5.5 or later
 SAS cable
 1x Single SATA (7pin) – 1x Fixed SAS (8482)
 Built-In LTO (LTO5) (1500GB)
 Max.1
LTO (connect via RAID controller)
RAID controller ÿ It is share for HDD connection. Two RAID cards can not be installed
 RAID controller PCI EXPRESS(x8)
 RAID 0/1/10
 RAID cache: 128MB
 3Gbps SAS/SATA
 RAID controllerPCI EXPRESS(x8)
 RAID 0/1/5/6/10
 RAID cache: 128MB
 3Gbps SAS/SATA
 RAID controller is supported Case C/E/H/J of internal HDD only.
 SAS cable
 Built-in LTO(LTO4) (800GB)
 Note
 When connection via RAID controller, one RAID controller can support both HDD and LTO.
 Four PCI slots as standard. For details on compatible controllers, refer to "Optional Boards and Adaptable
Expansion Slots" at the end of this document.
 Refer to ''Software" to check whether your configuration requires backup software.
 Note that the backup utility included in the Windows Server 2008/2008 R2 does not support tape drives and
requires backup software.
6Gb/s SAS,PCI EXPRESS 2.0(x8)
[K410-217(00)]
[K410-198(00)]
[N8103-142]
2003
2003R2 2008 2008x64
R2x64
EL5 EL5x64
[N8151-103]
2003
2003R2 2008 2008x64 2008 R2
R2x64
EL5 EL5x64
[N8103-116A]
2003
2003R2 2008
R2x64
EL4 EL4x64 EL5
[N8103-117A]
2003
2003R2 2008
R2x64
EL4 EL4x64 EL5
[N8151-90]
2003
2003R2 2008 2008x64
R2x64
EL4 EL4x64 EL5 EL5x64
Express5800/GT110b
2008 R2
ÿ
2008x64 2008 R2
EL5x64
2008x64 2008 R2
EL5x64
2008R2
16