Configuration Guide <internal HDD> (2.5inch HDD cage [N8154-23])
Choices of RAID configuration
Select RAID configuration from below. (Mixed configuration is not supported.)
Non RAID
RAID
RAID0/1/10
RAID5/6
Note
Configuration F and G use the SATA controller of the on-board chip.
Configuration H, I, and J use the RAID controller of the PCI EXPRESS CARD. (It will occupy one PCI slot.)
For details on the HDD configuration, refer to the end of this document.
Case F. non RAID (connect to on-board SATA connector)
On-board SATA controller
standard
3Gbps SATA
2003
2003R2
2008
2008x64
R2x64
EL4
EL4x64
EL5
EL5x64
Case G. on-board RAID (connect to on-board SATA connector)
On-board SATA controller
standard
RAID 0/1/10
3Gbps SATA
2003
2003R2
2008
2008x64
R2x64
SATA HDD, SATA SSD for CASE F/G
SATA HDD (2.5inch)
160GB HDD
500GB HDD
1TB HDD
SATA SSD (2.5inch)
100GB SSD
Windows OS
Not Windows OS
Promise's card
LSI's card
2.5inch HDD cage
[option]
(Case F/G/H/I/J)
SATA cable
x4 standard
(SATA– SATA cable)
2008 R2
SATA cable
x4 standard
(SATA– SATA cable)
2008 R2
7,200rpm
[N8150-316]
7,200rpm
[N8150-317]
7,200rpm
[N8150-335]
[N8150-708]
Express5800/GT110b
On-board RAID
RAID cache: 128MB
Slot 3
Slot 2
Slot 1
Slot 0
Up to four (non hot-swap)
2.5inch HDD cage
[N8154-23]
Up to four (non hot-swap)
2.5inch HDD cage
[N8154-23]
Note
For more details about SATA HDD
and SATA SSD mixed configuration,
please refer to the end of this
document.
Device
Case F
SATA HDD
SATA SSD
Case G
Case H
SATA HDD
SATA SSD
or
SAS HDD
Case I
SATA SSD
Case J
SATA HDD
SATA SSD
SATA HDD
SATA SSD
10