NEC Express5800/GT110b User Manual page 13

Configuration Guide <internal backup device>
USB device(2) (connect to 5inch device bay and internal USB)
RDX
 USB cable
[K410-210(00)]
 Built-in RDX(USB)
 NOTE
 The USB cable of the backup device attachment cannot be used. It is necessary to arrange internal USB cable
(K410-210(00)).
 Refer to ''Software" to check whether your configuration requires backup software.
 Note that the backup utility included in the Windows Server 2008, 2008 R2 does not support tape drives and
requires backup software.
SCSI device(1) (connect to 5inch device bay and PCI slot)
DAT
ÿ
SCSI controller mandatory option
 SCSI controller
 SCSI cable
Built-in DAT
 Built-in DAT(DDS3/4/DAT72)(36GB)
 DDS1/DDS2 are not supported.
 NOTE
 Four PCI slots as standard. For details on compatible controllers, refer to "Optional Boards and Adaptable
Expansion Slots" at the end of this document.
 Refer to ''Software" to check whether your configuration requires backup software.
 Note that the backup utility included in the Windows Server 2008/2008 R2 does not support tape drives and
requires backup software
 RDX data cartridge (160GB)
 RDX data cartridge (320GB)
 RDX data cartridge (500GB)
 RDX data cartridge (640GB)
 RDX data cartridge (1TB)
ÿ
Ultra 320 SCSI, PCI EXPRESS(x1) [N8103-107]
[K410-160(00)]
[N8151-86]
2003R2
2003R2
R2x64
EL4 EL4x64
[N8151-51A]
2003
2003R2 2008 2008x64 2008 R2
R2x64
EL4 EL4x64 EL5 EL5x64
Express5800/GT110b
2003
2008 2008x64 2008R2
R2x64
EL4 EL4x64 EL5 EL5x64
[N8152-20]
[N8152-26]
[N8152-27]
[N8152-30]
[N8152-33]
2003
2008 2008x64 2008 R2
EL5 EL5x64
13