Configuration Guide <internal backup device>
Up to one device (USB/SCSI/SAS) can be installed.
USB device(1) (connect to 5inch device bay and internal USB)
DAT
Internal USB cable
Built-in DAT(USB) (DDS3/4/DAT72) (36GB)
DDS1/DDS2 are not supported.
Built-in DAT(USB) (DDS4/DAT72/DAT160) (80GB)
DDS1/DDS2/DDS3 are not supported.
Built-in DAT(USB) (DAT160/DAT320) (160GB)
DDS1/DDS2/DDS3/DDS4/
DAT72/DAT160 for WORM are not supported.
Note
The USB cable of the backup device attachment cannot be used. It is necessary to arrange internal USB cable
(K410-210(00)).
Refer to ''Software" to check whether your configuration requires backup software.
Note that the backup utility included in the Windows Server 2008, 2008 R2 does not support tape drives and
requires backup software.
[K410-210(00)]
Express5800/GT110b
[N8151-69]
2003
2003R2
2008
2008x64
2008R2
R2x64
EL5
EL5x64
EL4
EL4x64
[N8151-78]
2003
2003R2
2008
2008x64
2008R2
R2x64
EL5
EL5x64
EL4
EL4x64
[N8151-99]
2003
2003R2
2008
2008x64
2008R2
R2x64
EL4
EL4x64
EL5
EL5x64
12