Troubleshooting; Overview; General Problems - Brother HL-3040CN Network User's Manual

15

Troubleshooting

Overview

This chapter explains how to resolve typical network problems you may encounter when using the machine.
If, after reading this chapter, you are unable to resolve your problem, please visit the Brother Solutions Center
at: http://solutions.brother.com/
This chapter is divided into the following sections:

General problems

Network print software installation problems
Printing problems
Protocol-specific troubleshooting
Wireless network specific troubleshooting (For HL-3070CW)
General problems
CD-ROM is inserted, but does not start automatically.
If your computer does not support Autorun, the menu will not start automatically after inserting the CD-ROM.
In this case, execute start.exe in the root directory of the CD-ROM.
How to reset the Brother print server back to the factory default
You can reset the print server back to its factory default settings (resetting all information such as the
password and IP address information). (See Reset the network settings to the factory default on page 69.)
My computer cannot find the machine/print server.
I cannot make a necessary connection to the machine/print server.
My machine/print server does not appear in the window of Remote Setup, BRAdmin Light or
BRAdmin Professional 3.
The firewall on your computer may be rejecting the necessary network connection to the machine. In this
case, you will need to disable the Firewall on your computer and re-install the drivers.
®
Windows 7 users:
Click the button, Control Panel, System and Security and then Windows Firewall.
Make sure the Windows Firewall state is set to off.
®
Windows Vista users:
1) Click the button, Control Panel, Network and Internet, Windows Firewall and click Change
settings.
2) When the User Account Control screen appears, do the following.
• Users who have administrator rights: Click Continue.
Troubleshooting15
15
15
15
15
15
15
15
15
15
124