Step By Step Chart For Wireless Network Configuration; For Infrastructure Mode - Brother HL-3040CN Network User's Manual

Step by step chart for wireless network configuration

For Infrastructure mode

a
Confirm your network environment. (See page 23.)
o Infrastructure mode
Connected to a computer with an access point
b
Confirm your wireless network setup method. (See page 24.)
®
(Windows )
Temporarily using a
USB cable
c
Configure your machine for a wireless network. (See page 28.)
See page 29.
See the Quick Setup Guide
Wireless configuration and installing printer driver have been completed.
Configuring your machine for a wireless network (For HL-3070CW)
Using the Brother
installer application
(Recommended)
(Macintosh)
Temporarily using a
network cable
Configuring your machine for a wireless network
See page 31.
Installing the printer driver
Using the
SES/WPS/AOSS control
panel menu
(if your wireless access
point supports either
SecureEasySetup,
Wi-Fi Protected Setup
or AOSS™)
See page 41.
See the Quick Setup
Guide
3
3
Using the PIN Method of
Wi-Fi Protected Setup
(if your wireless access
point supports Wi-Fi
Protected Setup)
See page 45.
®
(For Windows )
See page 47.
(For Macintosh)
See page 51.
22
3