Rear Panel; Speaker Connection - Phonic ZAIOO User Manual

15. USB Port
Connect your USB flash drive to this input. Once a
drive is connected, the files will initiate and the first
track will appear paused on screen.
16. VU Meter
This meter will display the ZA100's output signal
level.
17. Tape Input
These stereo RCA inputs can be used to connect
external devices to the ZA100. These may include
CD players, MP3 players or laptop computers.
18. Tape Input Control
This control adjusts the incoming signal level from
the RCA tape input connectors. This also controls the
incoming signal from the ZA100's USB player.
18 17
19. Line Output
These RCA connectors will send the main signal
out to external input devices. This could include
secondary mixers, recording devices or additional
amplifiers/speakers.
20. Power Button
This button is pushed to turn the device on and off.
Rear Panel Description
21. 4 Ohm Speaker Output
This ¼" phone jack connector can be used to connect
external speakers with a minimum impedance of 4
ohms. This connector shares the output power with
the binding post outputs.
21
6
16
19
20
22
22. Screw Terminal Speaker Outputs
These connections are used for output to speakers.
They offer 100V line output for both zones 1 and 2.
23. Power cable
This power cable should be connected to a suitable
AC power source in order to use the ZA100.
24. Fuse
Turn this fuse holder to release the fuse enclosure. In
the event that a fuse burns, users can replace it with
another identical 2 amp fuse.
23

Speaker Connection

24
ZA100